💖 FREE Gold Heart Birthstone Necklace with orders over $150 🎁

Congratulations! Your order qualifies for free shipping Free worldwide tracked shipping over $99AUD
Woman measuring her ring finger at home with a paper strip and ruler

How to Choose the Right Ring Size at Home

Written by: Indie and Harper

|

|

|

Time to read 4 min

Finding your ring size at home is easier than you might think. With a ruler, a strip of paper and a ring that already fits, you can measure in minutes and order with confidence.

This guide covers two simple ways to measure your ring size, a US and Australian size chart, tips for an accurate result, what to do if you are between sizes and how to find a ring size for a gift.

Measure a ring that fits, or measure your finger with paper or string.

Our rings use US sizes, so check the chart below.

Measure at the end of the day, when fingers are largest.

If you are between sizes, size up for wide bands or large knuckles.

Table of contents

What You Need to Measure Your Ring Size

You only need a few simple tools to measure your ring size accurately.

Tools to Gather

  • A ruler: with millimetre markings
  • Paper or string: a thin strip that does not stretch
  • A pen to mark the measurement
  • A ring that already fits, if you have one

Measure in millimetres rather than inches, as it is much more precise. Avoid stretchy materials like elastic or thick paper, as they can give a ring size that is too big.

Method 1: Measure a Ring That Already Fits

This is the most reliable at-home method if you already own a ring that fits the finger you want to wear the new ring on.

How to Measure

  1. Place the ring on a flat surface
  2. Measure the inside diameter straight across the centre
  3. Note the measurement in millimetres
  4. Match it to the ring size chart below

Measure the inside edge only, not the outside. Your ring size can differ between hands and fingers, so measure a ring from the same finger where possible. This method is ideal for everyday styles like stacker rings.

Method 2: Measure Your Finger

No ring to measure? You can measure the circumference of your finger instead.

How to Measure

  1. Wrap a thin strip of paper around the base of your finger
  2. Mark where the paper overlaps
  3. Lay it flat and measure the length in millimetres
  4. Compare the circumference with the chart below

The paper should feel snug but not tight, and should still slide over your knuckle. If it slips off easily, your ring size will be too large, so measure again.

Common Mistakes

  • Pulling too tight: this gives a ring size that is too small
  • Measuring cold fingers, which shrink in cooler weather
  • Forgetting the knuckle if it is wider than the base of your finger

Ring Size Chart: US and Australian Sizes

All Indie and Harper rings use US sizes. Use this chart to convert your measurement into a ring size, with the closest Australian letter size as a guide.

US size Inside diameter (mm) Circumference (mm) Approx. AU size
4 14.9 46.8 H
5 15.7 49.3 J½
6 16.5 51.9 L½
7 17.3 54.4 N½
8 18.1 57.0 P½
9 19.0 59.5 R½
10 19.8 62.1 T½
11 20.6 64.6 V½
12 21.4 67.2 Y

Australian sizes are shown as approximate equivalents. For more detail, see our ring size guide.

Tips for an Accurate Ring Size

Fingers change size through the day, so a little care gives a more accurate ring size.

  • Measure late in the day: fingers are usually at their largest
  • Avoid measuring after exercise, a hot shower or when very cold
  • Measure two or three times and use the most consistent result
  • Check the ring will slide over your knuckle

Summer heat and travel can make fingers swell slightly, so if you live somewhere warm, measuring on a warm afternoon gives a realistic ring size for everyday wear.

Should You Size Up or Down?

If your measurement falls between two sizes, the right choice depends on the band width and your knuckle.

  • Wide bands: size up, as wider rings feel tighter
  • Thin bands: your true size usually feels best
  • Large knuckles: size up so the ring slides on comfortably
  • Stacking rings: a snug fit stops them spinning

A ring that is slightly loose is easier to fix with a sizing bead than one that will not fit over your knuckle. Explore our guide to the best sterling silver rings for women for more fit tips.

Measuring ring size at home with a paper strip around the finger

Finding a Ring Size for a Gift

Buying a surprise ring? You can still find the right ring size without asking.

  • Borrow a ring: measure one she wears on the same finger
  • Trace the inside of a ring on paper and measure the circle
  • Ask a close friend or family member
  • Choose an adjustable style if you are unsure of her ring size

Promise rings and birthstone rings make lovely gifts. See our promise rings guide, and if a size is not quite right, our wrong size page explains your options.

Shop Rings by Size

Our rings are made in 925 sterling silver and gold plated finishes, in US sizes, and every piece arrives gift-ready. Once you know your ring size, explore our favourite styles in your ring size below.

Shop stacker rings, birthstone rings and promise rings.

 

Ring Size FAQs

How do I find my ring size at home?

Measure the inside diameter of a ring that fits, or wrap paper around your finger and measure the circumference, then check a size chart.

What ring sizes do Indie and Harper rings use?

Our rings use US sizes. Our chart shows approximate Australian letter sizes too.

Should I size up or down?

If you are between sizes, size up for wide bands or larger knuckles.

When is the best time to measure?

Late in the day, when your fingers are at their largest.

Do wide rings fit differently?

Yes. Wider bands feel tighter, so you may need half a size larger.

How can I find a ring size for a gift?

Measure a ring she already wears on the same finger, or trace its inside on paper.

What if my ring does not fit?

Contact us and see our wrong size page for exchange options.

Leave a comment